Magnum Sea and Land

For customers requiring a high end professional cutting and welding system. Five-hundred DC amps will drive large electrodes in addition to providing the necessary impetus for air-carbon-arc cutting if desired. The unit ships with welder, oxygen containment system, umbilicals and more. This is the absolute top of the line for dive contractors and large independent marine operators.

Ships with:

• Lincoln® 500 amp DC welder, the absolute top of the line.
• Titan® oxygen containment system as shown.
• Six CGA540 style cylinders with valves.
• Two stage precision oxygen regulator.
• Knife switch.
• Umbilical, 100 foot includes oxygen hose.
• Oxyarc - oxyflame cutting torch with pigtail cable connection.
• Oxyflame marine wrapped cutting rods.
• Welding stinger, 400 amp.
• Complimentary welding electrodes.

MAG2000GX5 PDF

FOB Phelan CA 92371

One pallet.

Approximate weight: 2500 lbs.

This is state-of-the-art digital umbilical control replaces knife switches.

No internal power source required. Works off of the incoming cables from the welder. The control box displays an internal solenoid for ultimate current protection. The unit is fused and reads both volts and amps. Tenders can dial in the welder for ultimate cutting or welding.

Welder Specifications:

When you need it all, consider the rugged Air Vantage 500 for railroad, mining, heavy-duty construction, and rental fleet use. A direct gear-driven compressor, with no belts or clutches to wear out, pumps out plenty of air for arc gouging, plasma cutting or almost any air tool. This Air Vantage 500 Welder/Generator and Air Compressor has powerful 500 amps at 100pct duty cycle which is enough for almost any stick, TIG, MIG or flux-cored welding project. And, the precision arc starting provided by Lincoln Chopper Technology and Touch-Start TIG will make any operator a better welder. Don't pay extra for plenty of AC generator power - up to 20,000 watts of 3-phase and 12,000 watts of 1-phase is standard. Stainless steel roof and side panels provide added durability and corrosion-resistance. The reliable Cummins B3.3 water-cooled diesel engine will keep you running - and working - for a long time.

 Features:

• Rotary Screw Compressor

• VMAC brand rotary screw direct-drive air compressor rated at 60 CFM, 100 PSI, 100pct duty cycle

• Delivers abundant air for arc gouging with up to 3/8'' carbons, plasma cutting (plasma cutter sold separately) and air tools such as an impact gun

• Plenty of AC Generator Power

• 20 kW continuous 3-phase 240V AC generator power will operate industrial equipment such as plasma cutters, pumps, inverter welders and grinders

• 12 kW continuous 1-phase AC generator power for common construction tools and lights.

• Stainless Steel Enclosure

• Standard stainless steel roof, side panels and engine-access door deliver added protection, durability and corrosion-resistance. Eliminates need to replace these items due to paint damage or rust

• Sliding Engine-Access Door - Lockable engine-access door slides open for easy access in tight spaces

• Simple to Operate

• Use the mode switch to select one of four Process Modes, including CC-Stick, Downhill Pipe (for stick), Touch-Start DC TIG or CV Wire. Then dial in the desired output

Processes:

• TIG

• Stick

• MIG

• Flux-Cored

• Gouging

Application:

• For railroad, mining, heavy-duty construction, and rental fleet use

Specifications:

• Rated Output, Current/Voltage/Duty Cycle:

  • 500A/40V/100pct

  • 550A/36V/60pct

  • 575A/35V/50pct

• Output Range:

  • 30-575A DC, 40-300A Pipe

  • 20-250A DC TIG, 14-40V CV,

  • 12,000 watts, 1-Phase

  • 20,000 watts, 3-Phase

  • Compressor 60 CFM, 100 PSI

• Engine Model: Cummins B3.3 Diesel

• Number of Cylinders: 4

• Horsepower: 56

• Speed: 1800 RPM

• Weight: 1690 lbs

• Overall Dimensions: 50.8'' H x 32.7'' W x 63.1'' D

Warranty:

• Three-year Lincoln Warranty on welder

• Engine and compressor are warranted separately by the manufacturers