Portable Cutting System
Ships with the following:
- Magnum cutting torch with flame adjusting thumb valve.
- Lightweight 3000 psi composite cylinder DOT certified and weighing only
- CGA540 3000 psi cylinder valve with safety valve
is the standard filling size for
- Preset 150 psi precision
oxygen regulator more than
required for challenging
- Alice backpack with patented
- Patented exoBLADE flame cutting consumables come 50 per box.
- Deluxe 12 volt ignition
system with float charger.
- Spare collet .375 size with
- Gloves and #5 burning
- Pelican carry case, military
- Online instructional video.
- UPS 1 package. 120 lbs. approximate.
Weighing in as the lightest, most powerful backpack cutting torch in the world, the unit has proven popular with tactical as well as repair and salvage personnel on land and marine settings. The units can be submerged for underwater cutting when used by trained personnel. Without question, this portable unit raises the bar on performance and reliability.
Cut an impressive amount of steel in half an hour on a single charge. Weighing in at a fractional 16 pounds, this featherweight backpack cutting system can be taken almost anywhere to cut almost any material in seconds. Consider the possibilities of thirty minutes of continuous cutting to melt through ferrous and nonferrous materials with little effort. Used by repair technicians, field dismantling mechanics, emergency rescue personnel, police departments and more.
Pressurized oxygen is driven through their center of the oxy-flame tube focusing a ten-thousand degree particle flame to perform over 24 separate processes, from cutting to piercing. Patented style oxy-flame tubes handle the scope of almost any assignment.
Oxy-flame tubes can be easily bent for access to difficult cutting areas often minimizing dismantling time. The longer flame tubes are favorites among heavy equipment personnel for piercing and removing pins. With no preheating, the focused particle stream can burn through rust, scale, paint, slag and even limited layers of concrete.
The cutting torch displays a thumb valve so the length of the flame can be adjusted with one hand on the fly. No other adjustments are required to pierce through 4" of steel in 4 seconds. Imagine the possibilities.
Melt through any known material with its focused ten-thousand degree particle stream.
Speed: Consider the advantages of a process that can pierce through four inches of steel in four seconds or remove a foot of weld in eight second flat. Will readily cut through multiple layers of material where oxyacetylene washes out after the first layer. Unstoppable performance using oxygen. Safer than acetylene.
Power: When you consider ten-thousand degrees is four times the speed of oxyacetylene, you also realize the temperature breaks all material barriers allowing a single cutting rod to burn through almost any ferrous and nonferrous material with relative ease
Versatility: A single exothermic cutting rod/tube can be bent for many unique processes. Over 24 separate processes can be achieved by a mere change in hand position. Cut, gouge, pierce, and much more.
Safety: Oxygen based exothermic cutting eliminates the need for acetylene. We have also separated the ignition source from the backpack oxygen supply for additional safety measures.
We accommodate special orders and routinely provide technical cutting advice for marine and land applications.