Magnum Sea and Land

500 amp DC welder with 6 composite cylinders in low profile rack. Oxygen supply is equal to three tall steel cylinders.

Low profile system ships with:

• Lincoln® 500 DC amp welder, the absolute best.
• Oxygen containment system as shown.
• Six 3000 psi composite cylinders with regulators.
• Two stage precision oxygen regulator.
• Knife switch.
• Umbilical, 100 foot includes oxygen hose.
• Oxyarc - oxyflame cutting torch with pigtail.
• Oxyflame marine wrapped cutting rods.
• Oxyarc marine wrapped cutting rods.
• Welding stinger, 400 amp.
• Complimentary welding electrodes.

MAG2000GX56 PDF

FOB Phelan CA 92371

One pallet.

This is state of the art cutting. Ships with our newly developed digital umbilical control which replaces knife switches.

Welder Specifications:

When you need it all, consider the rugged Air Vantage 500 for railroad, mining, heavy-duty construction, and rental fleet use. A direct gear-driven compressor, with no belts or clutches to wear out, pumps out plenty of air for arc gouging, plasma cutting or almost any air tool. This Air Vantage 500 Welder/Generator and Air Compressor has powerful 500 amps at 100pct duty cycle which is enough for almost any stick, TIG, MIG or flux-cored welding project. And, the precision arc starting provided by Lincoln Chopper Technology and Touch-Start TIG will make any operator a better welder. Don't pay extra for plenty of AC generator power - up to 20,000 watts of 3-phase and 12,000 watts of 1-phase is standard. Stainless steel roof and side panels provide added durability and corrosion-resistance. The reliable Cummins B3.3 water-cooled diesel engine will keep you running - and working - for a long time. 

Features:

• Rotary Screw Compressor

• VMAC brand rotary screw direct-drive air compressor rated at 60 CFM, 100 PSI, 100pct duty cycle

• Delivers abundant air for arc gouging with up to 3/8'' carbons, plasma cutting (plasma cutter sold separately) and air tools such as an impact gun

• Plenty of AC Generator Power

• 20 kW continuous 3-phase 240V AC generator power will operate industrial equipment such as plasma cutters, pumps, inverter welders and grinders

• 12 kW continuous 1-phase AC generator power for common construction tools and lights.

• Stainless Steel Enclosure

• Standard stainless steel roof, side panels and engine-access door deliver added protection, durability and corrosion-resistance. Eliminates need to replace these items due to paint damage or rust

• Sliding Engine-Access Door - Lockable engine-access door slides open for easy access in tight spaces

• Simple to Operate

• Use the mode switch to select one of four Process Modes, including CC-Stick, Downhill Pipe (for stick), Touch-Start DC TIG or CV Wire. Then dial in the desired output

Processes:

• TIG

• Stick

• MIG

• Flux-Cored

• Gouging

Application:

• For railroad, mining, heavy-duty construction, and rental fleet use

Specifications:

• Rated Output, Current/Voltage/Duty Cycle:

  • 500A/40V/100pct

  • 550A/36V/60pct

  • 575A/35V/50pct

• Output Range:

  • 30-575A DC, 40-300A Pipe

  • 20-250A DC TIG, 14-40V CV,

  • 12,000 watts, 1-Phase

  • 20,000 watts, 3-Phase

  • Compressor 60 CFM, 100 PSI

• Engine Model: Cummins B3.3 Diesel

• Number of Cylinders: 4

• Horsepower: 56

• Speed: 1800 RPM

• Weight: 1690 lbs

• Overall Dimensions: 50.8'' H x 32.7'' W x 63.1'' D

Warranty:

• Three-year Lincoln Warranty on welder

• Engine and compressor are warranted separately by the manufacturers